HOW AND WHEN TO CHANGE ID CODES ON MY CABELA’S® GUN DOG® GS-8100 REMOTE TRAINER
WHEN IS CHANGING ID CODES NECESSARY?
- When matching 2 or more remotes to control the same collars.
- If you notice that 2 remotes are controlling the same collar unintentionally.
Decide on a code before changing the ID code. Your ID code can be 1 -10.
- Once you have decided what your ID code is going to be, save this information for a later step.
Move the toggle switch to the left.
Press and hold the Up and Down buttons on the side of the handheld remote at the same time for 3 seconds. When the unit displays the current mode number (1-6) and PROG appears on the screen, release the Up and Down buttons.
Using the arrow Up and Down buttons, select the number 7 on the screen. The 7 will change to “id” on the screen. Press and release the left button on the handheld. The screen should now display the current ID Code or (- - ) if it has never been changed.
Again, using the Up and Down buttons, select the ID Code you chose in step 1. Press and release the left button.
Re-Pair your collar(s) back to your handheld. For assistance with pairing, visit HOW TO PAIR A SINGLE COLLAR TO MY CABELA’S® GUN DOG REMOTE TRAINER GS-8100.
If you are programming multiple handhelds to control the same collar(s), repeat steps 2-5 on each additional handheld. Be sure to use the same ID Code on all handhelds. Pairing the collar(s) to each additional handheld is not necessary.
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.