HOW TO CHANGE THE BATTERY IN MY SPORTDOG® TEK 1.5 HANDHELD REMOTE
HOW TO CHANGE THE BATTERY IN YOUR TEK 1.5 REMOTE
Remove the screws from the back of the handheld using a #1 Philips screwdriver. Then remove the back cover.
You may need to use a thin flathead screwdriver or another small tool to pry off the back cover.
Pinch the wires firmly between two fingers and carefully pull the battery’s wire plug out of the connector in the handheld.
If it doesn’t initially come out, pull harder.
Insert the new battery’s wire plug into the connecter in the handheld. Then place the battery back inside.
Ensure the gasket is still in place. If not, press the gasket back in place.
This step is important for the handheld to remain waterproof.
Put the back cover on and reinsert the screw.
Be careful not to fasten the screws too tight as this can damage the handheld.
You may need to pair your handheld and collar after replacing the battery. Please refer to HOW TO ADD A COLLAR TO MY SPORTDOG® TEK 1.5 HANDHELD REMOTE.
Contact Customer Care
If you need further assistance, please contact our customer care team.