HOW TO CHANGE THE BATTERY IN MY SPORTDOG® UPLANDHUNTER® BEEPER
Remove the 4 screws from the back of the beeper using a small screwdriver.
Pull the front and the back of the beeper apart.
Carefully pull the battery’s wire plug out of the connector in the beeper using pliers. If it doesn’t initially come out, pull harder.
Remove the rubber gasket from the battery cover. You can do this with a paperclip or something similar.
You may need to wipe out any dirt or debris that has built up.
Replace the gasket with the new gasket provided in your battery replacement kit. This step is important for the beeper to remain waterproof.
Insert the new battery’s wire plug into the beeper connector, then place the battery inside the beeper.
Put the beeper back together and hand-tighten the screws with the screwdriver. Be careful not to fasten the screws too tight as this can damage the beeper.
After replacing the battery, you may need to pair your remote transmitter and beeper. Please refer to HOW TO PAIR MY SPORTDOG® UPLANDHUNTER® REMOTE WITH A SINGLE COLLAR OR BEEPER or for more than one beeper HOW TO ADD ANOTHER SPORTDOG® COLLAR OR BEEPER TO MY SPORTDOG® UPLANDHUNTER® 1875.