HOW TO CHANGE THE ID CODE ON MY CABELA'S® GUN DOG® TRAINER GS-8000 or GS-9000
WHEN CHANGING ID CODES IS NECESSARY
When matching 2 or more handhelds to control the same collars.
If you notice that other handhelds are controlling your collar unintentionally.
You will need to pair your collars to the handheld after completing the steps.
Decide on a code before beginning the process. Your ID code must be 0-9. Once you have decided what your ID code is going to be, save this information for a later step.
Place the Toggle Switch in the LEFT position.
Press and hold both Rocker Switches for approximately 3 seconds. Unit will display current mode number and a “PROG” icon.
Release both Rocker Switches.
Press the UP on the Rocker Switch until “id” is displayed.
Press and release the Upper Button on the Remote Transmitter to select.
Use the up/down Rocker Switch to adjust to your desired ID code.
Press and release the Upper Button on the Remote Transmitter to select.The display will flash 3 times between the selected ID code and “id” to confirm the selection. Then it will return to the original display.
Repeat these steps using the same code with any additional handhelds that you want to be matched to control the same collars.
- If you are changing the ID codes because you have more than one handheld controlling a collar unintentionally, use different codes.
After matching the ID codes, pair the desired collar to one of the handhelds.
- You do not need to pair the collar with each handheld. After pairing to one handheld, all matched handhelds will be paired to that collar.
For more information, go to our article HOW TO PAIR OR ADD A COLLAR TO MY CABELA’S® GUN DOG® GS-8000 OR GS-9000.
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.