HOW TO CHANGE THE RUBBER COVER ON MY SPORTDOG® UPLANDHUNTER® 1875 REMOTE
THINGS TO KNOW
If you need to replace the battery, this should be done at the same time as they both require opening the remote. Visit HOW TO REPLACE THE BATTERY IN MY SPORTDOG® UPLANDHUNTER 1875 REMOTE for more information.
Your remote is still 100% waterproof without the rubber covers. However, they do help keep mud and debris from getting in your charge port and prevent damage to the charging pins.
You can purchase a replacement cover on SportDOG.com.
Remove the screws from the back of the remote with a #1 Phillips screwdriver. Then remove the back of the remote.
Locate the rubber cover, and remove any pieces left. Even if your rubber cover is missing, you should still check for any remnants
Slide the T-shaped tab of the rubber cover into the slot on the remote.
Put the back of the remote on and hand tighten all the screws with a screwdriver.
Be careful not to fasten the screws too tight as this can damage the remote transmitter.
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.