HOW TO CHANGE THE STIMULATION RANGE ON MY SPORTDOG® FIELDTRAINER® 425X ,425XS, OR THE SPORTHUNTER 825X
Changing the Stimulation Range on your SportDOG E-Collar
THINGS TO KNOW
Your collar has two stimulation ranges.
The FieldTrainer 425X and SportHunter 825X collars come with a low and medium stimulation range. The collars are factory set to medium.
The FieldTrainer 425XS collar comes with a medium and high stimulation range. The collar is factory set to medium.
The medium stimulation range is approximately 50% stronger than the low.
The high stimulation range is approximately 50% stronger than the medium.
- For example, when your remote dial is set to level 2, a collar set to a high stimulation range would be 50% stronger compared to a collar set to a medium stimulation range.
The stimulation range of the collar can be determined by turning the collar on and listening for the number of beeps or looking for the number of flashes.
- Two beeps or flashes represent medium.
- Three beeps or flash represents high.
HOW TO CHANGE STIMULATION RANGES
Ensure the collar receiver is off by confirming there are no lights after 10 seconds.
Press and release the power button to turn the collar on. Immediately after powering the collar on, press and hold the power button. The indicator light will begin to flash orange. Do not let go.
Continue to hold the power button until the number of orange flashes corresponds with the desired stimulation range, then release. After you have selected the stimulation range, the collar will power off.
If you fail to release the power button on the desired number of orange flashes, continue to hold as the collar will cycle back through the options.
To make sure you selected the correct stimulation range, turn the collar back on and count the number of green flashes or beeps
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.