HOW TO PAIR MY SPORTDOG® HOUNDHUNTER® 3225 REMOTE TRANSMITTER WITH A SINGLE COLLAR
If you are pairing multiple collars to a remote transmitter, visit our article HOW TO PAIR MULTIPLE COLLARS TO THE SPORTDOG® HOUNDHUNTER® 3225 REMOTE TRANSMITTER.
Ensure that your remote’s toggle switch is in the up position.
Ensure the collar receiver is off by confirming there are no lights after 10 seconds.
Press and hold the power button on the collar receiver. The Indicator Light will turn green. Continue to hold until the light goes out, then release the power button.
Press and hold the upper button with the bump on the remote transmitter until you see the collar Indicator Light flash green 5 times. Your remote transmitter and collar are now paired.
TEST PAIRING
- Turn the Intensity Dial to any number.
- Ensure the toggle switch is in the up position.
- Press the upper button with the bump. The collar’s Indicator Light will illuminate red.Be careful not to touch the contact points to avoid feeling the stimulation.
- If there is no red light, repeat the pairing process.
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.