HOW TO REPLACE MY CABELA’S® GUN DOG® GS-4000 COLLAR BATTERY

IMPORTANT INFORMATION

The standard life expectancy for the batteries is 3-5 years.

The replacement battery kit can be purchased SportDOG.com.


Remove both screws from back of collarRemove both screws from back of collar

Remove both screws from the back of the collar using a 3/32 hex key. If you purchased a battery replacement kit from our website, a hex key is provided in the kit.

Pull Receiver ApartPull Receiver Apart

Pull the front and the back of the collar apart at the seam allowing the strap to slide through the side slots.

Pull Pull Battery Plug Out Of ConnectorPull Pull Battery Plug Out Of Connector

Pinch the battery’s wires next to the white connector and pull the battery’s wire plug out of the connector in the collar. If it doesn’t initially come out, pull slightly harder.

Remove collar gasket & clean out gunkRemove collar gasket & clean out gunk

Remove the rubber gasket from the battery cover. You can do this with a paper clip or something similar. Wipe out any dirt or debris that has built up.

Replace the gasket with the new gasket provided in your battery replacement kit.

  • This step is important for the collar to remain waterproof.
Place Battery Back In ReceiverPlace Battery Back In Receiver

Insert the new battery’s wire plug into the collar connector, then place the battery inside the collar.

Put the front and back of the collar back together and hand-tighten the screws back into the collar with the provided hex key.

  • Be careful not to fasten the screws too tight as this can damage the collar.

Pair your remote transmitter and collar. Please refer to HOW TO PAIR MY CABELA’S® GUN DOG® GS-4000 REMOTE TRAINER.


CONTACT CUSTOMER CARE

If you need further assistance, please contact our customer care team.

We’d love your feedback on the page you just read!

Related Articles