HOW TO REPLACE THE RUBBER CHARGE PORT COVER ON MY CABELA’S® GUN DOG® GS-4000 OR GS-8000 COLLAR
IMPORTANT INFORMATION
Your collar is still completely waterproof without the rubber charging port cover. However, it does help keep mud and debris from getting in your charge port and prevent damage to the charging system.
Remove both screws from the back of the collar with a 3/32 hex key.
Pull the front and the back of the collar apart at the seam allowing the strap to slide through the side slots.
Locate the rubber cover slot, and remove any pieces left. Even if your rubber cover is missing, you should still check for any remnants.
Slide the T-shaped tab of the rubber cover into the slot on the collar.
Put the back and front of the collar back together, reinsert the screws and hand-tighten them with the 3/32 hex key.
- Be careful not to fasten the screws too tight as this can damage the collar.
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.