HOW TO TEST MY SPORTDOG® NOBARK SBC-10 COLLAR
GET READY TO TEST
SportDOG Brand® NoBark SBC-10 :: How to Test Your SBC 10 Collar
HOW TO TEST
Make sure the unit is off by confirming there are no lights after 5 seconds.
Press and hold the power button. As the collar powers on, it will beep and flash green or blue depending on the mode, then stop flashing. CONTINUE TO HOLD until the collar flashes again with no beeps.
Press and release the power button within 5 seconds to cycle through the modes, indicated by the color of the flashing light.
Stop when you see the red flashing light that indicates Test Mode.
Quickly put the Test Light Tool’s wires up to the contact points on the collar.
After 5 seconds, the unit will beep followed by a quick pulse of static stimulation starting at level 1 and increasing to level 10. The center of the Test Light Tool will flash an amber light when static is detected. This means the collar is working properly. After the test is complete, the collar will turn off.
Turn the collar back on to resume normal operation.
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.